Questions and plumbing advice in the Plumbing Jobs | The Job-board - .
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
- Threads
- 28
- Messages
- 32
- Views
- 19.5K
Hello All
My name is Bill and have been a plumber for 35years. I have just returned from Australia where I was working as a plumbing inspector for 12 years! I have returned to the UK ( Ireland actually) and am considering getting back on the tools (probably just maintenance) .. Interested to...
Since replacing the expansion vessel on our Viessman 333 gas boiler, we've experienced a major problem. When we want hot water only,(DHW) setting, the radiators are being activated! Obvious solution may be with the 3 way port, but the complete heating system is now automatically switching itself...
anyone seen sparkly / shimmering asbestos, i think its cement board as it looks too new to be ab
I’ve had a new bathroom put in and having problems with the shower. The pressure is awful and runs cold after about 3-4 minutes. The hot water still comes out of the taps and we have another shower which has never run out of hot water after 15/20 minutes plus and is still working perfectly. The...
@Lou and I have an issue with out water. It's often Chlorinated heavily. Sometimes not so bad. Too often to guarantee a nice glass of water, but not often enough to get bloody used to it. So I keep noticing it.
Now I've looked online, and a filter seems to be the way to go. I aren't going to...
Hi,
Seeing as there has apparently been a bit of a clear out with members leaving and those of us staying are here to support the forum, and help to answer questions, why do we still have name tags?
I couldn't care less if I've got sooper dooper plumber after my name, but as we're all here to...
We're clearly going through some clearing up at the moment and it's easy to get caught up in that. I've just unbanned somebody I banned assuming they were in the same posting pattern as a troll I banned. Turns out they weren't. And just perhaps clicked like on a couple of their posts as they're...
Continue reading...
Just bought a property and having problems with a loose toilet seat. There are Allen screws keeping the seat in place but if I try to tighten them it’s still loose. Is it a toilet that needs removing to gain access to the underside in order to tighten the seat?
Look at this gem , builders smacked it with sledgehammer or similar and left it , apparently they couldn’t smell gas so left it as it was .
Hello. I'm hoping for some advice, please. I am having a new bathroom installed with a walk-in shower, using a strong resin shower tray. The glass shower screen (2m high, 1.1m wide, 8mm thick) was attached to the wall yesterday but the wall and tray were not square. At the wall end, the screen...
Hi guys, which combi from the Worcester models that give the best flow rate on the hot water? The boiler will be installed in the loft. What's your views on the Worcester 30si? 3 bedroom bungalow and 1 bathroom property.
Any recommendations are welcomed.
Hi all - my first post!
I'm trying to help my dad sort out his very hot radiators and find out why it makes no difference to the radiator heat when the TRV setting is reduced i.e. regardless of what the TRVs are set to (i.e. regardless of whether the TRV is at the frost setting, or settings 1...
Thanking you kindly etc etc
1570788601
Also does anyone recognise this toilet? Needs a new seat. Weird shape. I have drawn over the wee the customer didn't see fit to flush in case anyone is enjoying a nice apple juice or somesuch. In many ways her act was a noble act of water saving...
Hi, a stopcock has seized and I need to replace it but the pipe is an unusual rubber/ plastic material. It’s approximately an inch ID. Has anyone got any advice for replacement compatible fittings? Will it need inserts etc?
Thanks in advance and some pics below.
I have replaced a radiator and I managed to spill some of the contents of the old rad on the carpet.
Is there any way to remove the black stain? It's an industrial grade carpet so I can use pretty much any chemical on it but i have no idea what I can use that will remove the iron oxide.
Any...
I get blocked and delayed why ...? Why Am I in the naughty corner no one has told me why
...centrakheatking
Currently doing a refurbishment of our place.
Camray 2 with RDB burner has served us well since 1988 :rolleyes:
So, time for an upgrade to a nice new low emission, high efficiency oil boiler...
.....The Grant VortexBlue External seems to tick all the boxes
Vortex Blue: External | Grant UK...
Creating content since 2001. Untold Media.
Tags
Newest Plumbing Threads
-
Trying to source a dual-flush valve
- Started by Thomas J Marshall
- Replies: 2
-
-
-
-
What constitutes a Commercial Appliance and thus a Commercial Kitchen?
- Started by FozzieBear
- Replies: 3
-
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
- Started by boiler101
- Replies: 4
-
Hole in copper pipe, solder under floor, T coupling & protection- Started by dreikher
- Replies: 0
-
-
-
-
-
-
-
-