Questions and plumbing advice in the Oil and Solid Fuel Forum - .
Some popular plumbing forums: Plumbing Advice - Plumbing Tools - Plumbing Courses & NVQ's
Has any installer/user any feedback on these?.
We've had a Grant Thornton oil boiler for about 5 years and suddenly it trips the electricity...
I'm looking for some advice on a frustrating problem I'm having with my old Eurostar 50-60s oil...
Help Please
We have a 2005 Worcester Bosch Oil Heatslave 26/32 that is fitted with the optional...
Im working on 6 suspended air blowers running old riello G5s.Oil tank is 100m away on
ground...
I've a client with a rusty 20yr+ old Certikin 180 (44kw) oil pool boiler that needs changing...
My oil boiler is 2009 vintage. Just been serviced. Had a new tank fitted by approved fitter. I...
My firebird oil boiler hw supply is luke warm, but does heat up slightly when run if the ch is...
Hi, we have Worcester Bosch heatslave external oil boiler 18/25
Boiler locked out. Pressure was...
Recently I needed to re-route very old and dodgy oil pipe from tank to boiler. I dug trench and...
Please help
Our Grant Vortex Pro oil combi boiler seems to have developed a drip from some sort...
Evening All,
We've just moved into gas boilers (after years doing gas) and are currently...
Camray 5 (90A) (20 year old) oil boiler, had a noisy fan on the boiler so investigated, just a...
I have a new Grant Vortex 15/26 oil boiler installed.
It has a boiler thermostat with no...
Hi. Currently experiencing an issue with our oil fired central heating system. When CH/HW is...
Hi All,
I have a Firebird Enviromax external oil boiler, it has a Riello RDB2.2 C26 burner...
Hi,
I have an oil-fired Aga with a BM oil control valve and a Flexitemp thermostatic control...
I have a oil fired Rayburn with a BM controller and flexitemp, installed for 10yrs +, which has...
Hi we had a recent service on our 40 year old Thorn oil boiler, we fire it up for the 1st time...
Hi guys, I'm relatively new to oil and have a question regarding S/ES and H/EH nozzle patterns...
Hi there. We have recently moved into a rental. We told our landlord and he says he can't smell...
Hi everyone-im a first time poster and after some info on what type of boiler to fit to my...
Hi i hope someone can help, a couple weeks ago boiler was not staying on so i thought i would...
Worcester Danesmoor 20/25, about 18 years old. B11 burner.
We came home a few days ago to find...
- Poll
Any concensus on heating oil additives?
Bought a couple bottles of this stuff on amazon it...
What is the significance of the kg/hr stamped on danfoss nozzles, I have a 0.6 usgpm nozzle...
Hi all I have to site a condensing oil boiler close to a boundary. Its going to be one of these...
Hi all I have a Stanley superstar 60k oil and last year it developed an issue with the...
I am told that a Toby 4cc-13cc oil control valve can be used to replace my Rayburn’s faulty...
The boiler has just been serviced and lots of new parts fitted, On firing up all works fine for...
Hi, wondering if anyone can help. I have a leak coming from my oil boiler only when the boiler...
Very strong varnish/gloss smell from behind oil fired boiler.
Was strong kerosene smell for a...
Hi. Asking for a relative whose neighbour seemingly DIYed an oil tank replacement. She was aware...
Builder at my house went through oil line has been repaired and oil purged back to boiler. Now...
Hi I had a boiler fitted about 18 months ago and have found out that it was never registered and...
Hi,
Firstly, I am neither plumber nor heating engineer, just a willing diy, have a go guy.
I...
With regs requesting more oil line pressure testing, what's the best way to test an existing oil...
Hi all.
Okay.
Long storey but, I'll try & keep it as short as possible.
We are buying a house...
Hy all,
Do oftec regs allow passing of the oil feed through the foundation wall under floor...
Happy New Year all!
New Year new problems.....
I have a new Titan oil tank to connect up...
hi chaps, major headache this winter with so many tanks having water and contaminants in bottom...
Hi,
I'm still getting used to oil after converting from wood pellets.
I'm fairly happy with...
Bit of help on the regulations please?
An external oil boiler (metal case) sited outside the...
Hello all, we just moved into a house with a oil Rayburn range as the primary source of heating...
I attended a lock out on a 40 year old Myson with an electro oil burner.Old style with orange...
Need to repair an oil line that’s underground (digger/ old oil line that’s being disused) now I...
Hi everyone.
This is to do with a house not yet bought; the oil access issue may well be a...
I have a worcester greenstar camray utility 12/18 oil boiler and we have not used the hot water...
Hey. Fairly new to oil. Serviced above boiler Last week. All working fine but now had customer...
Tags
Newest Plumbing Threads
-
-
Y Plan central heating gets hot on hot water demand
- Started by MPGASANDPLUMBING
- Replies: 0
-
Grant boiler rusting inside after 1 yr
- Started by RayPlumb
- Replies: 6
-
Instructions say to apply glass cement to rubber washer. Can I use silicone?
- Started by JM Tiling
- Replies: 2
-
How do I remove the copper pipe from the plastic connector?
- Started by JM Tiling
- Replies: 2
-
Pressure reducer/regulator for plastic water line?
- Started by carpetguardian
- Replies: 1
-
Cold water issues in the top bathroom
- Started by Apex84
- Replies: 3