Discuss Replace shower head and hose? Possible ? in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

UK

Murdoch

Esteemed
Res.Electrician
Messages
1,129
Got a bath which is just over 10 years old and the shower head needs replacing.

This photo shows the layout.

I appreciate that access will be required to do this and could be achieved from the adjacent room by cutting a hole in the wall.

I’m not sure what I would then see and in preparation I was wondering if anybody could give me any pointers

Thanks
IMG_7018.jpeg
 
Will be just a 1/2 male iron on the body of the tap with the shower hose and head attached to that easy job once you have access
 
So I need to access below the taps ? And not below where the shower hose goes ?

Correct aslong as you can tape the other hose to the old one / use some elec rods to fish it back through etc
 

Reply to Replace shower head and hose? Possible ? in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

I removed an old shower hose, which was installed by previous home owner at least 12 years ago. Upon removal, the connection is like nothing I...
Replies
2
Views
439
J
Hi all, I currently have one of these shower heads fitted in my bathroom : Milan Rectangular Rainfall Shower Head + Water Blade | Victorian...
Replies
0
Views
396
Jarrod
J
    • Like
Hi, I need some help on this shower drain installation. I’m about to install a corner shower kit in my basement bathroom. But I just found out the...
Replies
9
Views
810
hi all i hope you are all well i'm planning to install my shower mixer on Saturday. today i was doing a dry fit and i wanted to show you some...
Replies
6
Views
589
I’m after some replacement roller wheels, not necessarily the whole roller units. The shower unit was made by Biava - pretty old, around 20 years...
Replies
0
Views
496
Back
Top