Hi Oil experts. I had a grant wall boiler with a failed transformer. Carried out a service and pretty sooty nozzle, and baffles build up suggest not cleaned in a while. The bottom baffle on the left corner had completely burnet through.
Any Idea on the process on how this occurs and why just on one spot?. Also what impact would this have on the combustion and setting it up with this in place. ? I have set the boiler up at the lower output (16kw) and settings seem to be reading OK for now.
I have a new set on back order, Just wondering if this could start to affecting combustion or just run a little hotter at flue. ? If left too long would I end up sooted again. ?
Any Idea on the process on how this occurs and why just on one spot?. Also what impact would this have on the combustion and setting it up with this in place. ? I have set the boiler up at the lower output (16kw) and settings seem to be reading OK for now.
I have a new set on back order, Just wondering if this could start to affecting combustion or just run a little hotter at flue. ? If left too long would I end up sooted again. ?
