Matt0029's latest activity
-
MMatt0029 replied to the thread heatrae sadia 25l 9004010..Thanks I think there is a filter in the breather pipe. But there isn't much distance between the bottom of the unit and the hot taps...
-
MMatt0029 replied to the thread heatrae sadia 25l 9004010..Thanks yes the draw off are all lower the the unit. Breather pipe has tundish on it.
-
MMatt0029 replied to the thread heatrae sadia 25l 9004010..It has a breather pipe coming out of the top. With no valve on it.
-
MMatt0029 replied to the thread heatrae sadia 25l 9004010..First time I've come across one like this before there expensive units
-
MMatt0029 replied to the thread heatrae sadia 25l 9004010..When I turn the hot tap on the solenoid is in the closed position. As this operates then the low water level sensor opens it again. So...
-
MI came across a ~ 20L heater with no expansion vessel that had one of these pressure relief valves set to I think 6 bar but it also had...
-
MMatt0029 replied to the thread heatrae sadia 25l 9004010..It has a high and low water pressure sensor on the unit linked to the solenoid valve
-
MCould be might be worth phoning heat rae
-
MMatt0029 replied to the thread heatrae sadia 25l 9004010..Thanks I'll give a ring. I have the manual there is a filter on the cold main in it. There a low and high water level sensor that opens...
-
MMatt0029 replied to the thread heatrae sadia 25l 9004010..Thanks so it can be mains in and still classed as gravity out?
-
MMatt0029 replied to the thread heatrae sadia 25l 9004010..Do you mean gravity out as in feed from a storage filter?
-
MMatt0029 replied to the thread heatrae sadia 25l 9004010..What's gravity out imply please? It's mains feeding it. Thank you
-
MMatt0029 replied to the thread heatrae sadia 25l 9004010..So even though the solenoid opens to fill and shuts when the unit is full. It also needs to open when a hot tap is opened to allow the...
-
MMatt0029 replied to the thread heatrae sadia 25l 9004010..Thanks so it filled and stopped filling so the solenoid valve is opening and closing. It did take a long time to fill. However the flow...
-
MAt the solenoid pins just wiggle the connector off a smidge so you can get probes on etc
